How to configure your Polycom SoundPoint Series IP Phone for use on the TELAIR network

Skip to step 3 if your phone has not been provisioned before.

Step 1:

1. Select Menu
2. Advanced
3. enter password: 456
4. Admin Settings
5. Reset to Defaults
6. Reset Device Settings

Step 2: Do the following once the above is complete: 

1. Select Menu
2. Advanced
3. enter password: 456
4. Admin Settings
5. Reset to Defaults
6. Reset Local Configuration

Step 3: Enter in provisioning rule: 

1. Select Menu
2. Advanced
3. enter password: 456
4. Admin Settings
5. Network Configuration
6. Server Menu.
   ***Please make sure the following the parameters are set:****
   Server Type: HTTP
   Server Address: <provided separately for privacy>
7. Save Settings and Reboot phone.

Your phone is now registered and will come online.